ATEX certificated bellhousings and couplings

Coupling and bellhousing for mechanical power transmission applications within hazardous areas.

Coupling and bellhousing for mechanical power transmission applications within hazardous areas; ATEX compliant stainless steel, carbon steel, GGR & GGGR cast iron bellhousings combined with ATEX compliant 'JXL' torsionally resilient couplings, of pin and bush design. Specified, manufactured and supplied to the requirements of your application.   ATEX certificated to Directive 2014/34/EU   II2GD-IM2-TX  -50°C ≤ Service Temp ≤ 105°C.  Harmonised Standards BS EN 1127:1, BS EN 13463:1, BS EN 13463:5, BS EN 50303.

Flywheel coupling and bellhousing for mechanical power transmission applications within hazardous areas; Also available are engine bellhousing and 'JXL' anti-static, flameproof flywheel coupling, ATEX certificated to Directive 2014/34/EU II2GD-IM2-TX  -50°C ≤ Service Temp ≤ +105°C. Harmonised Standards BS EN 1127:1, BS EN 13463:1, BS EN 13463:5, BS EN 50303, BS EN 1834-1, BS EN 1834-3.

All JXL couplings are capable of accepting a momentary overload of twice nominal torque.

During operation bellhousings and JXL couplings do not generate heat therefore operational surface temperature will depend on the temperature of mating components and surroundings. Refer to BS EN 13463:1 9.3.2 f)
Equipment ‘T’ class or maximum temperature (T max) to be determined by machine builder.

For further details: https://www.jbj.co.uk/anti-static-couplings.html#ATEX-coupling-bellhousing