Engineering news

‘The rate of change is accelerating beyond comprehension’: Autodesk director of industry development, Asif Moghal

Professional Engineering

Asif Moghal, director of market and industry development at Autodesk
Asif Moghal, director of market and industry development at Autodesk

Since the first Industrial Revolution, it has generally been possible to look a few years ahead with some degree of certainty. Making confident predictions has always been a foolhardy game, but technologies often developed in predictable ways and major breakthroughs could be seen approaching on the horizon.

AI has upended that, according to Asif Moghal from Autodesk, which makes software used across engineering, architecture, construction and manufacturing. Professional Engineering spoke to the director of market and industry development about what the future holds, and why it is now so hard to say with any certainty.

What is the biggest challenge facing UK manufacturing?

One is the starting point of the sector – I think it was probably not as advanced as we might have thought when terms like Industry 4.0 were being published. It was a great marketing slogan because it got everyone talking about digital technologies, and I think there were some assumptions about ‘We're all going to go to IoT [Internet of Things] and smart factories overnight.’

But the reality is the manufacturing sector – not just in the UK, but globally – was several stages behind that. A lot of our customers were saying, ‘I've got some more fundamental issues I need solving before I get to Industry 4.0.’

The rate of technological advancement has exceeded our ability to keep up. A lot of manufacturing customers know they need to digitise, they just don't know where to start.

What engineering solutions could solve those challenges?

Don't start with the tech. You need to start with something much more fundamental – where are you today? Where do you want to be? And what's stopping you getting there? Once we understand those things, we can then think about digital capabilities that help address them.

We have a framework where we talk about capabilities like mass customisation, digital collaboration. We explore, with the customers, which of those capabilities helps close the gap.

Whatever we uncover, one underlying theme comes up: data. What data do you have where you're good or bad, or you could be better?

How is AI changing the nature of work at Autodesk?

In the strategy team, we're using it to do deeper analysis of what's happening in the market, tech trends rising or falling. We're looking at how we might organise ourselves to be more effective, predicting what our customers might be struggling with next, so we can be prepared.

What customers tell us is that they don't really know how to implement AI, but they seem to be very clear on what the benefits could be – and it’s not so much about cost-saving, creating extra capacity. Most of our customers are looking at AI as a tool to enhance the capability of their workers.

AI is not a goal or an objective. It's a force-multiplier. Our customers typically come up with three things: How do I get my products to market faster? How do I manufacture my products with better quality, and much more profitability? And how do I operate the business more effectively?

What has Autodesk got right in recent years – and what has it got wrong?

Who can say what is right and what is wrong? It really depends on the timeframe.

One of the decisions Autodesk made was launching point solutions [focused tools that solve one specific problem in a workflow]. One of the first changes we made was to create industry collections, which actually turned out to be a good decision.

The next change was around making those collections available through a subscription model, which at the time some people loved and some people didn't like – but actually now it's become an industry standard. Then we started cloud-enabling some of our tools, and our current decision now is to become this platform company.

In the here and now, some people will say, ‘It's great, I can see the value of it,’ and some people will say, ‘No, I don't understand it.’ But over time, I think we will see that moving towards being a design and make platform company is the right decision.

How do you expect UK manufacturing to change in the next 10 years and beyond?

Anybody making a prediction 10 years out is guessing, because the rate of change is accelerating beyond all comprehension. I think we should think about the shorter term.

One thing we will see is our customers leveraging more synthetic agentic employees. They'll be leveraging tools like AI to do design reviews or engineering reviews. Or you might have interns coming into the business, and these tools might be the coaches.

The other thing that we'll see is agentic design and manufacturing tools continuing to remove the need to start from zero. At the moment, if I want to design a product, I would think about it, then I'd sketch it out on a piece of paper, then I might convert that rough sketch to CAD geometry, and then I would extrude that geometry into a solid. Then I would go through a process that would maybe take six months to get a concept developed. I think we'll see a compression of concept development, because of the way we can interface with agentic technologies using natural language.

The engineer of the future is going to have to be as much of a data scientist as they are an engineer, and I think they're also going to need to be extremely comfortable with [AI] prompt engineering. This is going to be part of their toolkit that they come out of university with.

Are there any skills that will become more important at Autodesk and its clients in the years to come?

Critical thinking. It’s important because it allows us to not fully rely on what we're being told by clever tools like AI. We need a level of curiosity that goes beyond just being interested in how things are made, that allows us to look at what is ‘impossible’ in design and manufacturing, and then to find a way to do it.

We're seeing customers in design and manufacturing having to solve architecture, engineering and construction-type problems. We're seeing the reverse as well: architecture engineering customers having to solve mechanical problems. So I think the engineers of the future will be able to transcend industry disciplines, to sit across the entire workflow.

What would you say to students and young engineers considering a career in UK design and manufacturing?

I would say great choice. We need as many people entering this industry as we possibly can. We need that level of diversity – so more ladies joining engineering as well, because it's historically been a more male-dominated industry.

If anyone wants to study engineering, I would 100% do it. Design and engineering encompasses material science, software, hardware, psychology, electronics, PCB design. There's so many different aspects that are converging to allow our customers to bring products to market. That makes it super exciting.


Want the best engineering stories delivered straight to your inbox? The Professional Engineering newsletter gives you vital updates on the most cutting-edge engineering and exciting new job opportunities. To sign up, click here.

Content published by Professional Engineering does not necessarily represent the views of the Institution of Mechanical Engineers.

Share:

Professional Engineering magazine

Current Issue: Issue 3, 2026

Issue 3 cover, 2026

Read now

Professional Engineering newsletter

A weekly round-up of the latest Professional Engineering news, straight into your inbox.

Log in and opt in to receive PE Weekly

Related articles